★ How to operate Attachment Nut Rivet Setter @N10d

① Lobster Blind Nut Rivet (M5 Steel)
② Make a prepared hole which is 0.1mm larger than dia. of the nut rivet.
③ Check if the nut rivet can insert to the prepared hole.
④ Equip @N10d into the drill driver.
⑤ Make sure @N10d set in place.
⑥ Adjust torque of the drill driver. (*1)
⑦ Make sure if the proper size of the mandrel is equipped.Then, spray lubricant oil on it.(*2)(*3)
⑧ Set the rivet nut into the mandrel.
⑨ Insert the rivet nut into the prepared hole.
⑩ Hold the grip firmly and rotate the drill driver clockwise pushing a little to the object.
⑪ After fastened, rotate the drill driver in anti-clockwise direction and remove the tool from thr nut rivet.
⑫ Finised.

(*1) Refer to "Required torque" in the instruction manual.After adjust the torque, conduct a riveting test.
(*2) Select the proper size of the mandrel.There are 3 sizes (M4, M5, M6) of the mandrel packed into the package.
(*3) The lubricant oil (5ml) comes with the package.


↓Download Leaflet