Zet flashar for ceramics φ80～180㎜ YF
・Excellent carbide tipped saw for ceramics, featuring hard, tough tips and grinding angle and cutting edge specifications focused on cutting performance
Use/Application
・For cutting general ceramic siding materials, wood, slate, FRP, CFRP, phenolic resin, epoxy resin, PVC, etc.
Specifications
| YF80 |
60g |
80mm |
1.4mm |
20.0mm |
15000(min-1(rpm)) |
16 |
open price |
| YF100 |
120g |
100mm |
1.4mm |
20.0mm |
13000(min-1(rpm)) |
20 |
open price |
| YF110 |
140g |
110mm |
1.4mm |
20.0mm |
13000(min-1(rpm)) |
22 |
open price |
| YF125 |
150g |
125mm |
1.4mm |
20.0mm |
7500(min-1(rpm)) |
24 |
open price |
| YF160 |
250g |
160mm |
1.6mm |
20.0mm |
6000(min-1(rpm)) |
32 |
open price |
| YF180 |
310g |
180mm |
1.6mm |
20.0mm |
5500(min-1(rpm)) |
36 |
open price |
IMPORTANT SAFETY INSTRUCTIONS
･Before using this product, be sure to read through the instruction manual included with the product and the operation manual provided by the electric tool manufacturer, to understand the contents thoroughly.
･Properly attach the protective cover specified by the electric tool manufacturer.
･The tipped saw generates sparks during use.
･Do not use the tipped saw in a place where ignition or explosion may occur.
･During work, be sure to wear protective gear (dust-proof goggles, safety shoes, protective cap, dust-proof mask and ear plugs).
･Use a circular saw whose rotational speed is lower than the maximum operating rotational speed specified in the instruction manual.
(Do not use this tool with disc sanders, grinding wheel cutters, low-speed cutters [for metal saw] or rechargeable tools.)
CAUTIONS ON INSCRIBED VALUES
※ Since dimensions, weights, etc. are nominal, there possibly are changes of some numerical values.
※ Specifications may be changed for improvement of the product without prior notices.
※ Listed prices do not include VAT. Please ask our distributor in case of purchases.